Monocure 3D CMYK Pigment set

Compare retailer offers

About this product

About Monocure 3D CMYK Pigment Set: Monocure 3D CMYK Pigment set is intended for use with Monocure 3D resin so custom colours can be created to suit individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure resin layer by layer. Application: Shake well before each use. Slowly drip the pigment solution into Monocure 3D resin and mix well until desired colour is reached. To obtain the same colour density of our pigmented Rapid resin, you will need to add approximately 4 grams (4 drops = approx. 1g) of the pigment dispersion into 100 grams of Resin. Adding too much pigment can result in slower curing times and potentially inhibit the cure completely. The pigment solution can be added to our white or clear resin depending on the finish you are after. When adding to the white base resin an opaque finish will result. If you add to the clear resin a transparent look will result. The more pigment you add, the more solid the colour will become, but remember by adding too much could result in curing and build plate adhesion issues. Please be extremely cautious when handling the pigments as they will stain very easily. Physic

More from Monocure