AMS Hub 4 Channel SA002-N

Compare retailer offers

About this product

Overview The AMS Hub is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit (4 channels) to a maximum of 4 AMS units (16 channels) to improve the refuelling speed across your multiple AMS units and support the redundancy of a buffered signal. * You will need a Bus cable (4pin) to connect the AMS Hub to the printer. Besides the 4-pin cable, the Bambu Lab AMS Hub includes all necessary accessories to connect 2x AMS units to the printer. * If you wish to add more AMS units, you need to order additional Bus cable (6pin) and PTFE Tube . To use 4x AMS units, you need to order additional 2x Bus cable (6pin) and 2x 2m PTFE Tube. *The picture is for reference only, try to place the AMS on the left side of the AMS Hub when actually printing, otherwise the filament in the PTFE tube is easy to get stuck. Expand Your AMS Options The built-in buffer of the printer can only be connected to 1 AMS. When replaced with AMS Hub, the printer will be able to connect up to 4 AMS. How-to video Check out our Wiki article : Connect AMS Hub and Multi-AMS Installation Install the AMS Hub on the back of the printer, replacing the Filament buffer if you have one, and use th

More from BambuLab